Pazhou discusses who will compete with him. Si Mi

2022-07-22
  • Detail

The 18th China International Architectural Decoration Expo (hereinafter referred to as "CCPIT") will be grandly held in Pazhou Exhibition Hall in Guangzhou from July 8 to 11. At this CCPIT, the 3D laser board laser edge banding launched by Simi 315 stunned the audience

the 18th China International Architectural Decoration Expo (hereinafter referred to as the China International Architectural Decoration Expo) will be grandly held in Pazhou Exhibition Hall in Guangzhou from July 8 to 11. The exhibition area of the 2016 China International Architectural Decoration Expo is as high as 3460000 square meters. It is expected that more than 650756 professional visitors at home and abroad will attend the Expo, and more than 2000 home building materials enterprises will gather in Pazhou at that time to compete, light their swords and debate their swords

the Construction Expo has become the first show platform for the champion enterprises in the field of Chinese architectural decoration. The major enterprises in the venue occupy a corner of the world, unveil new products, show their franchise advantages, and show their swords

in addition to the three sets of new cabinets with different styles that will be launched soon, the 3D laser board laser edge banding launched by Simi 315 is also a sword that can not be ignored in this Construction Expo

who will compete with Pazhou on the sword

look at the sword, look at the blade, look at the cabinet, look at the plate, the key to look at the plate is to look at the edge banding

now the edge banding strip of the most commonly used ordinary double decorative panel on the market is bonded with hot melt adhesive, and it is easy to make the adhesive layer yellow, aging and brittle if it is often touched with water. In the process of normal use in the kitchen, when washing dishes, washing vegetables or wiping the table top, there is often water splashing on the door panel, and it is often faced with the challenge of high temperature, plus the air humidity in special seasons Cooking water vapor is very easy to enter the board core through the aging glue seam combined with the side plate. The core material will swell after absorbing water, resulting in edge falling

considering the high-temperature and humid environment in the kitchen, the key to the cabinet is the plate, and the key to the plate is the edge banding. Simi 3D laser board adopts the laser edge banding technology of non hot melt adhesive, which perfectly wraps the core material and fundamentally makes the water vapor seamless. Greatly improve the moisture resistance of the plate, prevent the door panel from swelling and deformation, and reduce the risk of aging and embrittlement of the hot melt adhesive

the commonly used double decorative panels in the market use PVC edge banding belt + manual or automatic hot melt adhesive (eva/apao/pu) edge banding technology; The 3D laser board adopts ABS edge banding belt + Ruihao raukantex full-automatic laser edge banding technology. The back of the new ABS edge banding belt is equipped with a special functional layer (polymer), which is irradiated by a focused high-power density laser beam, so that the functional layer can melt quickly and be perfectly and seamlessly combined with the board

let's see the performance difference between 3D laser board and traditional double decorative panel through two groups of destructive comparison tests of simulated kitchen

test 1: simulate the boiling water boiling test under the harsh kitchen environment, and test the water absorption and expansion speed and degree:

the boiling water boiling test shows that under the same harsh kitchen environment, the moisture resistance and expansion resistance of 3D laser board are stronger than that of the traditional hot melt adhesive edge sealing double decorative panel, and the service life is equivalent to twice that of the traditional double decorative panel

test 2: simulate the seam dirt receiving test under the kitchen dirt environment, test the size of the glue seam and the difficulty of dirt receiving:

the seam dirt receiving test shows that under the same conditions, the sealing and dirt resistance of the 3D laser board edge plate is stronger than the traditional hot melt adhesive edge sealing double faced plate, only a small amount of it stays on the surface, and cannot enter the seam of the edge plate, and the oil dirt is seamless and can be cleaned as soon as it is wiped

when purchasing cabinet door panels, you should pay more attention to the gap of the side panel, which will determine the final service life of your cabinet, and the edge banding technology is the key. The 3D laser panel first launched by Simi on a large scale will be another innovation in the door panel production technology of the cabinet industry and another sharp sword in the cabinet industry

威海男科医院

贵阳男科医院

武汉皮肤病医院

Copyright © 2011 JIN SHI